Sorry, but device cannot be found.
The device is for business purposes only.

Leak Guard



My Leak Guard

Device is removed from the network
Device is not activated yet. Please make sure that you have activated your device by pushing devices button for 3 seconds. It is also possible that you try to use your device in an area or a place which is not under network coverage.
Name:
{{deviceName}}

Active for:
{{device.daysLeft}} days
{{device.alarmCredits}} alarm messages left
Processing payment, this could take up to 24 hours.
Expired

Registered phone numbers:
{{obj.value}}
Registered email:
{{savedEmail.value}}

Test messages at disposal:
{{device.testMsgCredits}} message(s)
All test messages are used for today. Please try again in a few days.

Leak Guard {{deviceId}}

Push the device's test button once. Device registering will continue about 10 seconds.

Push and hold the device's test button for 3 seconds period.

{{time | date: 'mm:ss'}}

Leak Guard {{deviceId}}

Name your Leak Guard with a name that describes well the object to be monitored. Under alarm this name is displayed on the alarm text message and with that name every alarm recipient should be able to recognize the object to be monitored.

[Required] Please enter 1-3 phone number where you want to get alarms. Every number will be sent a confirmation code by text message to verify your phone number.
To register alarm numbers you must have access to the phones with numbers and also Leak Guard at your hand. First input number where you want to receive messages about operation of the device. This includes messages like low battery level, disruption of devices normal operation or reminder about end of service subscription time. Messages are sent only when necessary and they are free of charge.

1. Input phone number and press 'send code' button.

2. Input your received four digit code to the place given.

If you want to register several phone numbers then press + and repeat phases 1 and 2.
{{obj.value}}
[Optional] You can also receive alarms to email if you like. You will be sent a confirmation code to verify your email address.
To set email alarm you must have access to your email account and Leak Guard at your hand. You get alarm messages to your email just like your phone by text messages. Additionally to address you have given will be send short report about device operation every 6th month. Report contains information about device operation like signal level and possible alarms. We do not send anything else.

1. Give your email and press 'send code' button.

2. Give the four digit code you received on that email address.
{{savedEmail.value}}


When you are ready with setting alarms, press 'register' button.
By pressing 'register' button, alarm service is activated to use. You can add or edit your alarms at any time by returning to this page.

By clicking Register, you agree to our Terms and that you have read our Data Policy

Cancel

REMOVE ALL ALARMS

By pressing this all data related to your account will be removed. After this procedure you cannot receive alarms from this device. You can still reactivate alarm service at any time by giving the information you want again.
Leak Guard {{deviceId}} Registered successfully.
We suggest you to save alarm call numbers in your phones address book, so you can quickly recognize caller in case of alarm. Please notice that alarm call comes from different number than alarm message.
SMS phone Voice call
{{obj.smsPhone}} {{obj.voicePhone}}

Leak Guard {{deviceId}}

Push the device’s test button or simulate leakage e.g by pushing device’s sensor gently against wet towel or dishcloth.

{{time | date: 'mm:ss'}}

Leak Guard {{deviceId}}

Push button was pressed

Leakage alarm was received

{{testData.stamp | date: 'HH:mm dd.MM.yyyy'}}

Moderate connection

Good connection

Excellent connection